We use cookies to improve our website for you. This means that we analyze the usage behavior of visitors to our website. Further use of our website is considered as consent to the use of cookies. For further information please refer to our privacy policy.

Menu

to top

Flat Rupture Discs

For protection against overpressure and vacuum in gases and liquids

 

Flat rupture discs from REMBE® offer you fragmentation- free opening across the full width of the vent. They can be produced in virtually any size, for extremely low  pressures from 15 mbar and with very low burst tolerances.

For protection against overpressure and vacuum, e.g. in storage vessels and low pressure systems. Also suitable as a secondary safety device alongside breather valves. This rupture disc is designed to work at standard operating ratios of up to 50 %* of the min. response pressure. It is installed directly between flanges and due to its half holes is suitable for all flange systems. A wide range of materials can be used as seals.

* Depending on the specific application

Rupture disc / bursting disc DODOD flat
REMBE® flat rupture disc

Your advantages

  • Requires less space than safety valves due to the lower installation height.
  • Available for all flanges and in any nominal width.
  • No holder required for installation.

Technical drawing rupture disc / bursting disc flat
REMBE® flat rupture disc
Technical data
NPS [in] DN [mm] pressure class B [mm] A [mm] BC [mm] n     Quantity D [mm]
PN ANSI
¾" 20 16 – 40 300 – 1500 22 73 75 4 14
1" 25 6 – 40 150– 900 29 76 80 4 16
1½" 40 6 – 40 150– 900 43 95 100 4 18
2" 50 16 – 40 150– 300 55 107 120 4 20
3" 80 6 – 64 150– 900 83 165 156 8 24
4" 100 16 – 64 150– 600 107 190 186 8 24
6" 150 16 – 40 150– 300 160 247 244 8 26
8" 200 6 – 10 150– 300 208 276 280 8 18
10" 250 6 – 10 150– 300 261 315 - - -
12" 300 6 – 10 150– 300 310 370 - - -
14" 350 6 – 10 150– 300 342 420 - - -
16" 400 6 – 10 150– 300 393 473 - - -
18" 450 6 – 10 150– 300 465 528 - - -
20" 500 6 – 10 150– 300 494 575 - - -
24" 600 6 – 10 150– 300 596 675 - - -
28" 700 6 – 10 150– 300 697 780 - - -
30" 750 6 – 10 150– 300 762 876 - - -
32" 800 6 – 10 150– 300 799 885 - - -
36" 900 6 – 10 150– 300 900 985 - - -
40" 1000 6 – 10 150– 300 1002 1085 - - -
Different sizes, pressure classes, temperatures, materials and fittings available on request.
send enquiry